I purchased a Frogger for $75.

It was Non-Working, just showing garbage. I put in a switching power supply and re-did the sync wires and got the monitor/game working. Now it’s time to restore.

The sides were in good shape so I just touched them up a bit. The Cpo was pretty bad though, time to restore it :

Before:

After:

Here she is :

Just a little more about what I had to do.

Coin Door :

The coin door was taken apart and lightly sanded. It wasn’t in real bad condition so I didn’t strip it. The front has hammered paint and the rest was not. So I just painted over it with Rustoleum flat black epoxy.
The stainless steel parts were cleaned and fine steel wool was used to polish them.
A new keyless lock was added.

Cab:

All black parts were sanded and re-painted. The back and top were done in Rustoleum Flat black. The front was done in Rustoleum Satin Black.

New smooth black T-Molding was put on.

Bezel:

The black bezel was cleaned and repainted with Krylon Fuson flat black.

New plexiglass was put on. Cut on the table saw with the finishing blade backward.

PCB:

HSSK was done by me :
http://www.jrok.com/sohs/frogger/frogger.html

Coin Up 1Up was used for adding credits:
http://www.onecircuit.com/node/41